An AI voice agent is only as useful as the phone line it calls from. CallMitra doesn't sell numbers. You bring them from a carrier account you own, and CallMitra works with three carriers for this: Twilio, Plivo and Vobiz.
They are not interchangeable in India. They differ on whether you get an Indian caller ID at all, on how inbound calls get wired up, on how many calls one number can carry, and on whether a customer can stay on the line while your team member joins. This post looks at those differences from two angles: what each carrier says about calling in India, and how each behaves once connected to CallMitra.
What does each carrier allow for calls inside India?
#Start with the question that decides most choices: can the carrier give your customer an Indian number on their screen?
| What the carrier's docs say | Twilio | Plivo | Vobiz |
|---|---|---|---|
| Domestic calling within India | Listed as not available | India-registered businesses only | Yes, after business KYC |
| Caller ID on calls to India | International, non-Indian number | Indian number rented from Plivo | Vobiz India number (others best-effort) |
| Call audio must stay in India | Not applicable | Yes (media anchoring) | Yes (media anchoring) |
| 140 and 160 series numbers | Not applicable | 140 promotional, 160 BFSI service and transactional | Both, outbound only |
Twilio's "not applicable" cells follow from its own guidelines: with no domestic route into India, the domestic-only rules don't come into play.
Twilio
#Twilio's India voice guidelines are blunt: outbound calls to India can only be made from international, non-Indian numbers. The same page says voice OTP and two-factor calls are not permitted and may be blocked, that high volumes of short calls can trigger carrier blocking, and that calls need the recipient's consent or TRAI treats them as unsolicited commercial communication.
For an AI agent calling Indian leads, that means a foreign number on the customer's screen. Twilio still works with CallMitra, and it is a reasonable choice if you already run Twilio for other countries or mainly receive calls. It is rarely the first pick for outbound campaigns to Indian mobiles.
Plivo
#Plivo requires KYC, and businesses that aren't registered in India go out on international routes with an international caller ID. Calls that break media anchoring end with the hangup cause violates_media_anchoring, which is worth knowing when you read call logs. Plivo lists landline series such as 022 and 080 as service and transactional only, and its India page states plainly that cold calling is prohibited and explicit digital consent is needed.
On capacity, Plivo's account limits page lists, for the India data region on its Professional plan, a default of 2 calls per second and 50 concurrent calls, with Enterprise limits set by contract. Plivo queues calls above the per-second rate and rejects calls above the concurrency limit. It also runs India and international accounts separately, so open the India one if you want Indian numbers.
Vobiz
#Vobiz positions itself as telephony for AI voice agents. Its KYC page asks individuals for Aadhaar or PAN and companies for PAN or GST, and Vobiz says approval typically takes under two minutes.
Because its 140 and 160 numbers are outbound only, you pair them with a regular DID number if you also want people to call you back. For 140 numbers, Vobiz lists calling hours of 10 AM to 8 PM and requires TATA DLT registration. For 160 numbers, it lists 24×7 use for OTPs, alerts and booking confirmations.
How do Twilio, Plivo and Vobiz compare inside CallMitra?
#Once a number is connected, these are the differences you will notice day to day. The figures are CallMitra defaults from our Indian carriers guide.
| In CallMitra | Plivo | Vobiz | Twilio |
|---|---|---|---|
| What you enter | Auth ID and auth token | SIP username, password, SIP domain, outbound proxy, auth token | Account SID and auth token |
| Inbound setup | Connect automatically | By hand: paste two addresses into Vobiz | Connect automatically |
| Simultaneous calls per number (default) | 50 | 2 | 2 |
| New calls per second (account) | 2, with 50 live calls per account | 2 | 1 |
| Straight transfer with whisper | Yes | Yes | Yes |
| Warm transfer, customer stays on the line | Yes | No | No |
How many AI calls can each carrier run at once?
#Two numbers decide your throughput, and people mix them up:
- Calls per second is how fast new calls can start. Vobiz's own explainer puts it well: even at 1 call per second you can start 3,600 calls an hour, so a low rate does not mean low volume.
- Simultaneous calls is how many can be live at the same moment. For AI calling this is usually the real ceiling, because each call stays open for a minute or more.
CallMitra applies a per-number limit on simultaneous calls. The console pre-fills 50 when you add a number, so change it under the number's settings to match the channels your carrier plan actually gives you. If you set it higher than the carrier allows, calls fail at the carrier instead of waiting politely in CallMitra.
Limits that sit above the carrier
- Per number
- Default 50 on Plivo, 2 on Vobiz and Twilio; up to 200
- Per campaign
- A maximum you set between 1 and 500 simultaneous calls
- Per workspace
- Up to 500 simultaneous calls across all campaigns
- Daily pace
- 50 calls a day per campaign by default
- Retries
- 3 attempts per lead, 2 hours apart (30 minutes after busy)
A worked example: you connect three Vobiz numbers to one campaign, each at 2 simultaneous calls. CallMitra puts each new call on the least busy number in the pool, so the campaign can hold six live calls. Plivo's per-account default of 50 live calls would let a single Plivo number carry the same campaign on its own, subject to the 2-per-second start rate.
| Setup | Live calls the campaign can hold |
|---|---|
| 1 Vobiz number at 2 | 2 |
| 3 Vobiz numbers at 2 each | 6 |
| 1 Plivo number at the default 50 | 50, within Plivo's account limits |
Before you buy more channels, check the campaign's own settings. A campaign only dials inside its calling window, and with the default daily limit and retry spacing, those settings, not the carrier, often decide the pace for small teams.
How do you connect each carrier to CallMitra?
#In the console, open Calls → Phone numbers → Add number and pick the carrier. Enter every number in international format (+91…). Carrier secrets are stored encrypted and are never shown again.
Plivo
#- In your Plivo console, copy the Auth ID (it starts with
MAorSA) and the auth token. - Paste them into CallMitra with the number, then click Test connection.
- Under Receive calls, click Connect automatically. CallMitra creates a Plivo application called
call-mitra-inboundand attaches your number to it.
A Plivo trial account can only call and receive calls from numbers you have verified in Plivo, so verify your own mobile before testing. More on the Plivo integration.
Vobiz
#- From your Vobiz account, copy the SIP username, SIP password, SIP domain (it ends in
.sip.vobiz.ai) and the auth token. - Enter them in CallMitra. Leave the outbound proxy at its default unless Vobiz gives you a different one.
- Click Test connection. It checks that the SIP domain resolves and the proxy accepts a connection.
- For inbound calls, copy the answer address and status address that CallMitra shows under Receive calls into your Vobiz number's settings. This is the one manual step Plivo and Twilio don't need.
More on the Vobiz integration.
Twilio
#- In your Twilio console, copy the Account SID (it starts with
AC) and the auth token. Enter both; outbound calls need them. - Click Test connection.
- Under Receive calls, click Connect automatically. CallMitra points the number's voice webhook at itself.
More on the Twilio integration.
Whichever carrier you use, finish with Call my phone from the agent page. It is the quickest end-to-end check that the number, the agent and the voice all work, and CallMitra doesn't bill test calls.
Which carrier supports call transfer?
#All three let the AI agent hand a call to a person, either when the customer asks or when your script says to. The difference is in how the handover feels.
- Straight transfer with a whisper works on Plivo, Vobiz and Twilio. Your team member hears a short whisper with the context before the customer is connected.
- Warm transfer, where someone joins, keeps the customer on the line while your team member joins the same call. It works on Plivo only.
If your team often takes over half-finished conversations, for example a property enquiry where the agent has collected the details and a sales manager closes, Plivo's warm transfer is the deciding feature.
Suresh Iyer
Call ended · 00:46
Agent: Hello Mr Iyer, this is the AI assistant for Skyline Homes, calling about the enquiry you made yesterday. This call is being recorded.
Customer: Yes, I was looking at the 3BHK.
Agent: I've noted the 3BHK on a higher floor and a budget of around ninety lakh. Would you like to speak to our sales manager now?
Customer: Yes, please. I have a question about the payment plan.
Agent: Sure, please stay on the line. I'm adding Rohit from our sales team to this call.
Customer: Okay, I'll hold.
Transferred to sales
Saved to lead · transcript attached
Sample call
Warm hand-off on a Plivo line
- On the call
- Agent, Customer
- Length
- About 46 seconds
- Result
- Transferred to sales
Illustrative call; names are fictional. Recording notice and AI disclosure are on by default in CallMitra.
Scroll the phone screen to read the whole call.
Which caller ID series should you use?
#TRAI's rules tie the caller ID to the kind of call. Numbers starting with 140 are for promotional calls. The 1600 series is for service and transactional calls from banks, insurers, other financial firms and government bodies, and a 1601 series is being phased in for other sectors, starting with utilities, logistics and couriers.
TRAI's third amendment of September 2026 also brings calls made with an artificial voice within its definition of application-to-person calls, which senders are expected to declare on the DLT platform with their caller-ID ranges.
CallMitra warns when a campaign starts on a number outside these series, but it doesn't block the call. Choosing the series, registering on DLT and keeping consent records are between you and your carrier. Our page on TRAI telemarketing rules for AI calls explains the categories in more detail.
What do Twilio, Plivo and Vobiz charge for calls in India?
#We have deliberately not quoted carrier prices here. Per-minute rates, number rental and channel charges differ by plan, number type and volume, and they change. Check the current figures on each carrier's site and ask for a written quote at your expected volume:
- Twilio: twilio.com/en-us/voice/pricing/in
- Plivo: ask Plivo's India team, as its public pricing pages for India were not reachable when we checked
- Vobiz: vobiz.ai/pricing
Carrier charges are billed by the carrier. CallMitra's plans are separate, start at ₹3,999 a month for 400 minutes (excluding 18% GST), and count only answered call time.
Which carrier should you choose?
#| If this is you | Choose | Keep in mind |
|---|---|---|
| You call Indian leads and want an Indian number on their screen | Plivo or Vobiz | Both need an India-registered business and KYC |
| You need many simultaneous calls per number and warm transfers | Plivo | Open an India account, separate from any international one |
| You want KYC done quickly and can do one manual inbound step | Vobiz | 140 and 160 numbers are outbound only; plan a small pool at 2 calls per number |
| You already run Twilio elsewhere, or mostly take inbound calls | Twilio | Calls into India go out on an international number |
Many teams end up with two: an Indian number for outbound campaigns and a separate inbound line for the AI receptionist. If you are new to the moving parts of a voice agent, start with what an AI voice agent is and come back to the carrier choice once you know your call volume.