Skip to content

Time bands, preferences and opt-outs

Calling hours and do-not-call rules for AI calls in India

When can businesses in India make AI promotional and service calls? TRAI time bands, NCPR and 1909 preferences, BLOCK PROMO, and your own do-not-call list.

By Updated
When a campaign lead's turn comes in CallMitra
  1. Lead's turn comes

    Next lead in the campaign queue

  2. Do-not-call check

    Listed numbers are never auto-dialled

  3. Inside the window?

    If not, the lead waits for it to open

  4. Agent calls

    Recording notice, then the greeting

  5. Callback asked for

    Moved into the campaign's hours

  6. Caller says stop

    Number joins your do-not-call list

On this page

In short

TRAI's default time bands block promotional calls before 10:00 and after 21:00 unless the customer opts in, while service and transactional calls are not blocked in any band. Customers set preferences through 1909 or BLOCK PROMO. CallMitra enforces each campaign's window, default 10:00 to 17:00 IST, and your do-not-call list; NCPR scrubbing stays with you.

Key takeaways

  • TRAI's default time bands switch promotional calls off from 21:00 to 10:00 for every customer, unless the customer opts in.
  • Transactional and service calls are not blocked in any time band, but adding an offer to one makes the whole call promotional.
  • Customers set preferences through 1909 or an app, category by category, or block all promotions with BLOCK PROMO (*1909*50#).
  • Every CallMitra campaign has its own window, 10:00 to 17:00 IST by default; the console warns if it starts before 9:00 or ends after 21:00.
  • Your workspace do-not-call list blocks automatic and manual calls. CallMitra does not check NCPR, so scrubbing stays with you.

Most complaints about business calls come down to two things: the call came at the wrong time, or it came after the person had said no. This guide covers both for teams running AI calling campaigns in India: the hours TRAI's rules allow, how customer preferences work, and how a do-not-call list should behave once someone opts out.

What hours does TRAI allow for promotional calls?

#

TRAI's 2018 regulations split the day into time bands that a customer can switch on or off for commercial communication. Note 1 to Schedule II says four of these bands "shall be default OFF for all customers irrespective of the status of registration of customer".

Time bandDefault for promotional calls
00:00 to 06:00Off for all customers
06:00 to 08:00Off for all customers
08:00 to 10:00Off for all customers
10:00 to 21:00Follows the customer's preferences
21:00 to 24:00Off for all customers

So promotional calls effectively reach people only between 10:00 and 21:00, unless the customer has chosen otherwise. That summary is our reading of the schedule; the bands themselves are quoted from the text.

Are service and transactional calls limited to the same hours?

#

Not by the time bands. The Third Amendment of 2026 substitutes Note 4 to say "transactional type and service type of Commercial Communications shall not be blocked during any time band".

That does not make every hour a good hour. A cash-on-delivery confirmation 10 minutes after an evening order is reasonable. A routine renewal reminder at 7:30 in the morning is likely to annoy, even if no band blocks it. And an offer slipped into a reminder turns the whole call promotional, so the promotional bands apply again. Our TRAI telemarketing rules guide explains how call types are decided.

Explicit digital consent. The 2025 amendment lets calls made with a customer's explicit digital consent reach them whatever their preferences. This is a paraphrase; check the current regulation text for how consent is recorded and how long it lasts.

Which window fits which campaign?

#

There is no single right window. It depends on the call type and on what each person agreed to. The table below is how we would think about common campaigns; it is a starting point, not a ruling on your case.

CampaignLikely call typeHours to think about
New project launch to an old databasePromotionalInside 10:00 to 21:00, unless each person opted in to other hours; scrub against NCPR first
Follow-up to a form filled in yesterdayService, if the enquiry is verifiable and recent; check the relationship rulesHours the person would expect; the default 10:00 to 17:00 is a safe start
Cash-on-delivery confirmation within 30 minutes of the orderTransactionalNot band-blocked, but avoid late night calls
EMI or renewal reminder to an existing customerServiceDaytime hours; keep offers out of the call
Callback the person just asked forDepends on the original callThe time they asked for, if sensible; CallMitra moves automatic callbacks into the window

How do customers set do-not-disturb preferences?

#

The National Customer Preference Register (NCPR) holds each customer's choices. Customers register them through 1909, by call, SMS or USSD, or through an app. The Third Amendment adds a BLOCK PROMO option, code 50 or *1909*50#, and moves customers who had fully blocked commercial communication into it.

Customers can also block promotions category by category:

CodeCategory
1Banking, insurance and financial products
2Real estate
3Education
4Health
5Consumer goods and automobiles
6Communication, broadcasting, entertainment and IT
7Tourism and leisure
8Food and beverages

A coaching institute calling about a new batch falls under education. A builder announcing a launch falls under real estate. If a customer has blocked that category, promotional calls in it should not reach them without their explicit consent; check the current regulation text for how consent overrides a blocked category.

Customers can complain within seven days of receiving an unwanted call, through 1909 or the DND app; PIB also points to Sanchar Saathi.

How does CallMitra's calling window work?

#

Every campaign in CallMitra has its own calling window. Outside it, no new automatic calls start.

  • Default 10:00 to 17:00 IST. Every new campaign starts with this window. Calls start from the first minute and stop starting at the end time.
  • Your hours, with a warning. You can change the window. CallMitra does not force a range, but the console warns you when a window starts before 9:00 or ends after 21:00.
  • Days of the week. Pick the days calls may start, for example Monday to Saturday.
  • Leads wait, never skipped. A lead whose turn comes outside the window is scheduled for the next time it opens.
  • Callbacks move into the window. If a caller asks to be called at 22:00, the callback is moved into your hours.
  • No holiday calendar. Use the days of the week or pause the campaign for dates you should not call.
  • Check windows that cross midnight. A window such as 22:00 to 06:00 is allowed, so double-check the values you set.

Calls that ignore the window. A manual "Call now" from the console, or a direct call through the API, runs immediately. Do-not-call is still enforced. Use these only for calls the person expects, such as a lead who has just asked to be called back.

Retries have their own settings. By default a lead gets up to 3 attempts, 2 hours apart, with a 30-minute wait after a busy line, and each campaign starts at most 50 calls a day unless you change it. The CallMitra docs on India calling list every setting.

How should a do-not-call list behave?

#

TRAI's NCPR is one list. Your own do-not-call list is another, and it matters just as much: it holds people who told your business directly that they do not want calls. CallMitra does not check NCPR, so where the rules require it, scrub promotional lists against NCPR before you upload them. Your own list is the one CallMitra enforces.

In CallMitra, a number gets on the workspace do-not-call list when:

  1. You add it, one number or many.
  2. The person says "do not call", "stop calling", "remove me", "unsubscribe" or "opt out" during a call.
  3. The post-call analysis classifies the call as an opt-out.
  4. The carrier reports that the number does not exist.
  5. There is a data-erasure request.

Once it is on the list, automatic dialling skips every lead with that number anywhere in the workspace. A manual call to it is refused. Pending callbacks are cancelled and new ones refused, and retries stop for calls that ended as an opt-out or a wrong number. The AI agent can add a number but can never remove one; only a workspace manager can.

Swati Kulkarni

Call ended · 00:34

Marathi
  1. Agent: Ha call record hot aahe. Namaskar, mi Prerna Academy chi AI assistant boltey. Tumhi JEE batch baddal chaukashi keli hoti.This call is being recorded. Hello, I am Prerna Academy's AI assistant. You enquired about the JEE batch.

  2. Parent: Aata office madhe aahe. Ratri das vajta call kara.I am at the office now. Call at ten at night.

  3. Agent: Ratri das khup ushira hoil. Mi udya sakali dahala call karu shakte, chalel ka?Ten at night would be too late. Can I call tomorrow at ten in the morning?

  4. Parent: Theek aahe, udya sakali.Fine, tomorrow morning.

  5. Agent: Dhanyavaad. Udya sakali dahala bolu.Thank you. We will speak tomorrow at ten.

Callback: tomorrow, 10 am

Saved to lead · transcript attached

Sample call

Sample call: a late callback request, Marathi

Language
Marathi
On the call
Agent, Parent
Length
About 34 seconds
Result
Callback: tomorrow, 10 am

Illustrative call. English gloss in brackets.

Scroll the phone screen to read the whole call.

Even if the agent had simply noted 22:00, CallMitra would have moved the callback into the campaign's window.

What stays your responsibility?

#

The window and the do-not-call list are tools. The decisions behind them are yours:

  • Choosing hours that fit each campaign's call type and the customer's preferences.
  • Scrubbing promotional lists against the NCPR registry where the rules require it.
  • Consent records, including explicit digital consent and revocations. CallMitra does not record consent for outbound calls.
  • DLT registration and the right number series: 140 for promotional calls, 1600 or 1601 for service and transactional calls. CallMitra warns about caller IDs outside the 140 and 1600 series but does not block.
  • Using manual "Call now" only for calls the person expects.
  • Pausing campaigns on holidays or dates you should not call.

A checklist before you set a window

#
  1. Decide whether the campaign is promotional, service or transactional.
  2. For promotional calls, scrub the list against NCPR and keep the window inside 10:00 to 21:00.
  3. Check the preference category your calls fall under.
  4. Choose the days of the week, and note holidays to pause on.
  5. Import your existing opt-outs into the do-not-call list before the first call.
  6. Run a test call and say "stop calling" to confirm the number is blocked.

For how this applies to property launches and site visits, see our real estate page; for admissions and batch calls, see the education page. Consent and data duties are in the DPDP consent guide. To see the window warning and the do-not-call list for yourself, book a demo.

Written by

Neeraj Goswami

Founder and CEO, CallMitra AI

Writes and reviews the guides, comparisons and compliance notes on this site and is responsible for their accuracy. Facts about rules and other companies link to their sources.

Frequently asked questions

Short answers to what teams ask before they switch on AI calling.

What time can promotional calls be made in India?

In effect, between 10:00 and 21:00 unless the customer has opted in to other hours. TRAI's 2018 regulations switch off the bands from 21:00 to 10:00 by default for every customer; the 10:00 to 21:00 summary is our reading of that schedule.

Can service or transactional calls be made outside 10:00 to 21:00?

TRAI's Third Amendment of 2026 says transactional and service commercial communications are not blocked in any time band. Whether a call at that hour is sensible is a separate question; most people do not want reminders late at night.

Does CallMitra check the NCPR (DND) list?

No. CallMitra enforces the calling window and the do-not-call list in your workspace. It does not check the TRAI NCPR registry or DLT registrations, so scrub your lists against NCPR where the rules require it.

What is the default calling window in CallMitra?

10:00 to 17:00 India time for every new campaign. You can change it per campaign and pick the days of the week. The console warns you if a window starts before 9:00 or ends after 21:00.

What happens to leads outside the calling window?

They wait. CallMitra schedules each one for the next time the window opens, so no lead is skipped because of the window. Callbacks a caller asks for are moved into the window too.

How does a number get on the CallMitra do-not-call list?

You can add it yourself, or it is added automatically when the person asks not to be called, when the post-call analysis classifies an opt-out, when the carrier reports an invalid number, or when there is a data-erasure request.

What is BLOCK PROMO?

An option added by TRAI's 2026 Third Amendment that lets a customer block promotional communication by dialling *1909*50# or choosing code 50. Customers who had fully blocked commercial communication are moved into it.

Sources

Last reviewed 18 November 2026.

  1. TRAI Telecom Commercial Communications Customer Preference Regulations, 2018 (Schedule II)www.trai.gov.in
  2. TCCCPR (Second Amendment) Regulations, 2025 (12 Feb 2025)www.trai.gov.in
  3. TCCCPR (Third Amendment) Regulations, 2026 (18 Sep 2026)www.trai.gov.in
  4. TRAI: Unsolicited commercial communication (UCC) pagewww.trai.gov.in
  5. PIB: DoT and TRAI action against spam calls (5 Feb 2026)www.pib.gov.in

Hear an AI agent call your phone

Build an agent from a job description and test a call before you connect any leads.